Inductive probes

A wide analogic probes range

• High precision
• Robust
• Measurement range 1 to 20 mm
• Resolution: 0.1 micron
• Pre-travel adjustment
• Hardened stainless steel body
• Viton gaiter®
• Polyurethane (PUR) cable
• Pneumatic or spring push
• Standard diameter (8g6)
• M 2.5 mm interchangeable tip

The Half Bridge or LVDT inductive probes technology has been known for over 100 years and enables to offer a products range covering most of the needs in dimensional control.

The inductive probes (five strokes available) are equipped with a connector compatible with the different display units of our product range.

The forward stroke can be activated by a spring or by air pressure. A (P) suffix indicates a probe activated by air pressure. This type of probe enables to make compact and cheap automatic measurement systems.

 There are two different tip forces. Feather Touch probes have benn designed especialy to gauge delicate surfaces sutch as windscreens Without any particular indication, the standard tip force is approximately 0.7 N. A (T) prefix describes a probe with reduced tip force (Feather Touch): F = 0.3 N

For pneumatic push probes it is necessary tu use filtered ( <5µm ) and dry air (60% maxi)

DIMENSIONS

 

-	Standard spring push
-	M802(A)	M804(A)	M810	M820
A	46	57	91	133
B	11.4	11.4	14.4	21.4
C	13.4	17.4	25.4	42.4
-	Standard pneumatic push
-	M802P	M804P	M810P	M820P	M810-2P
A	55.5	77.5	102.5	136.5	90.5
B	10.9	11.4	14.4	21.5	14.4
C	13.9	17.4	25.4	42.5	25.4
-	Feather touch / spring
-	M802T	M804T	M810T	M820T
A	46	68	91	134
B	11.4	11.4	14.4	12.9
C	13.9	17.4	25.4	33.9
-	Feather touch / pneumatic
-	M802TP	M804TP	M810TP	M820TP
A	55.5	77.5	102.5	136.5
B	10.9	11.4	14.4	12.9
C	13.9	17.4	25.4	33.9

SPRING PUSH

Product type	M801	M802(A)	M804(A)	M810	M820
Maesurement range (mm)	± 0.5	± 1	± 2	± 5	± 10
Pre-travel (mm)	0.15	0.15	0.15	0.15	0.15
Post- travel (mm)	0.35	0.35	0.85	0.85	0.85
Repeatability (µm)	<0.15	<0.15	<0.15	<0.15	<0.15
Accuracy (% of reading)	0.3%	0.3%	0.3%	0.3%	0.3%
Tip force (N ): Standard	0.7	0.7	0.7	0.7	0.7
Tip force (N) : Feather touch (T suffix)	-	0.3	0.3	0.3	-
Operating Temp. °C	+5 +80	+5 +80	+5 +80	+5 +80	+5 +80
Gaiter	Viton ®	Viton ®	Viton ®	Viton ®	Viton ®
Cable	2 m	2 m	2 m	2 m	2 m
Body diameter	8g6	8g6	8g6	8g6	8g6
IP rating	IP65	IP65	IP65	IP65	IP65
Standard product ref	80001	80002	80003	80004	80005
Feather touch product ref (T suffix)	-	80022	80023	80024	80025
Armoured product ref (A suffix)	-	80202	80203	-	-

PNEUMATIC PUSH

Product type	M802/P	M804/P	M810/P	M810-2/P	M820/P
Maesurement range (mm)	± 1	± 2	± 5	± 1	± 10
Pre-travel (mm)	0.15	0.15	0.15	0.15	0.15
Post- travel (mm)	0.35	0.35	0.85	0.85	0.85
Repeatability (µm)	<0.15	<0.15	<0.15	<0.15	<0.15
Accuracy (% of reading)	0.3%	0.3%	0.3%	0.3%	0.3%
Tip force (N@0,4 / 1bar)	0.8 / 2.8	0.85 / 2.5	0.85 / 2.5	0.85 / 2.5	0.85 / 2.5
Operating Temp. °C	+5 +80	+5 +80	+5 +80	+5 +80	+5 +80
Gaiter	Viton ®	Viton ®	Viton ®	Viton ®	Viton ®
Cable	2 m	2 m	2 m	2 m	2 m
Body diameter	8g6	8g6	8g6	8g6	8g6
IP rating	IP65	IP65	IP65	IP65	IP65
Standard product ref	80102	80103	80104	80114	80105
Feather touch product ref (T suffix)	80122	80123	80124	-	80125