General informations

The MB-RS module connect the entire range of M-Bus modules (probes modules, instruments..) on a PC or a PLC. Data are transmitted with USB Hi-speed or RS232 (ASCII protocol or MODBUS-RTU).

Up to 254 inputs can be connected. A footswitch ref 18020 can be also connected on the MB-RS The power supply is done through an external power transformer or directly via 12-30VDC.

This module transmits to the external device (PC, PLC) the raw values ​​of the connected probes.

General informations
Article references

RS 232 communication cable with PCControl pedal
References: 18060

Metro - Newsletter
so you don't miss anything
Subscribe to our newsletter