The S-shaped S2M force transducer measures tensile and compressive forces and can be used for a wide variety of static and dynamic measurement applications.
The consistently high output signal of 2 mV/V guarantees a good signal-to-noise ratio. It measures very precisely even with small forces (the lowest nominal (rated) measuring range is 10 N) and returns extremely reliable results.
Thanks to integrated overload protection, the S2M itself is protected against extremely strong overload in the case of machine damage.
High precision, even with low nominal (rated) forces, offers an extremely wide measuring range and reliable results with the best price-to-performance ratio.
Flexible, rugged and protected against overloads – for maximum safety
Time-saving plug and play solutions: Inconvenient on-site soldering and connector assembly are eliminated
| Property | Value |
|---|---|
| Maximum capacity (nominal load) | 10 N, 20 N, 50 N, 100 N, 200 N, 500 N, 1 kN |
| Tensile / compression | Tensile & compression |
| Type/technology | Strain Gauge |
| Calibration | Calibrated |
| Output signal | mV/V (passive strain gauge) |
| Degree of protection | IP67 |
| Mechanical interfaces | Both sides central internal thread |
| Height (without accessories) | 60 mm |
| Diameter (without cable or plug) | 80 mm |