HBK C9C Force Sensor
C9C Miniature Load Cell
Configurable, relaible, compact, dynamic: C9C is a cost-effective miniature force sensor for compressive forces. The compact and cost-effective C9C type series force sensors reliably measure compressive force where space is limited.
Due to their high fundamental frequency, they are suitable for very fast measurements. Like all strain gauge-based transducers, the C9C sensors also allow for static forces to be measured with long-term stability.
They ensure both robustness and plug and measure solution due to their welded design from stainless steel and flexible to order concept.
Available as passive load cell or with hard-wired inline amplifier with analogue or digital output signals.
- HBK accuracy class: 0.2
- Capacities: 50 N ... 50 kN
- Output signals: mV/V (passive), 0...10 V, 4 ...20 mA or IO-Link
Your advantages:
- Improved reliability: The Sensor Health monitoring of the C9C sends warnings in case of exceeding temperature or mechanical limits before problems occur.
- More information: Statistical information such as number of sampels or mean value are available.
- Standard instrument features: Limit switches, peak detection, digital output, filter.
- Fast: Internal sampling rate: 40 kHz, 0.9 ms cycling time to the IO-Link master.
- Greater precision: Use your calibration and improve the linearity of your C9C.
Benefits of all C9C:
Small, dynamic and robust
- Small diameter and flat design
- Welded design from stainless steel; EMC-tested
- High stiffness and small masses, leading to high fundamental frequency
- Highly flexible cable, suitable for drag chains, resistance against most oils
Besides being compact, the sensor is robust, EMC-tested, and delivers reliable results. It is ideal for measuring fast processes.
Immediately ready for use
- Various practical cable lengths, cable is suitable for drag chains and fuel-resistant
- If chosen without in-line amplifier: TEDS available and available with a mounted plug for all HBK measuring amplifiers on request
Time-saving plug-and-play sensors ideally suited for industrial environments.
| Maximum capacity (nominal load) | 50 N, 100 N, 200 N, 0.5 kN, 1 kN, 2 kN, 5 kN, 10 kN, 20 kN, 50 kN |
| Tensile / compression | Compression |
| Type/technology | Strain Gauge |
| Calibration | Calibrated |
| Output signal | mV/V (passive strain gauge) |
| Degree of protection | IP67 |
| Mechanical interfaces | Spherical load introduction |
| Height (without accessories) | 13 mm, 15 mm, 28 mm |
| Diameter (without cable or plug) | 26 mm, 46 mm |
